If you need new flange gaskets, you may be wondering where you can turn. The average person is generally not familiar with the different weld fittings and pipe fittings that are available to them. These are integral parts of the piping system — and becoming familiar with all aspects of titanium pipe fittings can help the consumer make an informed buying decision.
What Are the Types of Flange Gaskets?
A flange gasket is utilized to create a leak-proof seal for a piping system. There are several different types of flange gaskets that may be more appropriate for your project, depending your pressure and temperature needs.
The three different categories for a flange gasket are non-metallic, semi-metallic, and metallic. There are several different types of flange gaskets. One of these is called the composite flange gasket and it is designed to be used in high pressure environments while withstanding high temperatures. Another type of flange gasket is the metal flange gasket. This type of gasket is designed to withstand the very highest temperatures and the highest pressure. The most widely used flange gasket is the spiral wound gasket.
What is a Long Weld Neck Flange?
Long weld neck flanges are for self-reinforcing connections, which are primarily used in ASME pressure vessel applications. The long weld neck flange was designed to be used in place of a weld neck flange to connect to a piece of pipe. The design was created to help alleviate pressure that would otherwise be placed on the piece of pipe. The long weld neck flange is a common self-reinforced design. This is because these nozzles offer a thicker neck that can be used to withstand higher pressure and temperatures.
What Are the Most Used Flanges?
These are the two types of flanges used in piping systems for forged steel fittings the most. The weld neck flange is the most often used. This type of flange is considered to be the most secure and strong flange, as it helps to properly distribute pressure.
The slip-on flange comes in second in terms of being the most popular. It is installed by slipping the flange over the pipe. It is then held on securely by screwing it into place. One weld is made on the back of the hub, while the other weld is made on the inside of the hub. These types of flanges are initially less expensive, but keep in mind that the extra welding will cost more.
Pipeline corrosion alone costs the economy roughly $9 billion each year. If you are looking for forged steel fittings, you will want to speak with a professional distributor. This is because a professional will be able to direct you towards the forged steel fittings you will need, as well as provide you with any additional information that you may need to make an informed buying decision.